I know speed queen is the best, but that’s too expensive for me to justify at the moment. I had the set that came with the house but the washer quit on me a few months ago, and the dryer looks to be from the early 90’s so it’s probably not long for the world either. I’ve been going to the Laundromat cause I simply didn’t want to deal with it.

However we’re working so much overtime now that I just can’t blow an hour per week sitting down for that. The dogs already made at me for how much time I’m gone. So anyways, what’s the best bang for your buck washer and dryer set? Samsung is out of the question and no IoT sets.

  • cuboc@lemmy.world
    link
    fedilink
    arrow-up
    9
    ·
    7 hours ago

    OP: Where are you located? I can imagine the EU market being different than, say, the eastern Asian market.

    I live in the EU, and the top brands appear to be Miele (although quite expensive) and Bosch / Siemens (better bang for buck). I have a Bosch dryer that has lasted almost a quarter century and is still going strong. My current washing machine is a 15 year old LG, so I am happy with the bang/buck ratio there. I did have the motor replaced though at one time, so that is a bit of a cheat.

  • littleomid@feddit.org
    link
    fedilink
    English
    arrow-up
    5
    ·
    7 hours ago

    After a long search, we went with AEG. No smart, app based, AI bullshit. Just an analog washer dryer.

  • Not a newt@piefed.ca
    link
    fedilink
    English
    arrow-up
    4
    ·
    7 hours ago

    Find a local appliance repair shop that you trust, and ask them which ones are easiest and fastest to service. Speed Queen may be more reliable in laundromats where they can be fine with one washer down for a month, but at home you only have one, and anything more than a 3 day wait time is impractical. Therefore your best value is going to be whichever model can be brought back to operation the fastest without breaking bank.

  • lennybird@lemmy.world
    link
    fedilink
    English
    arrow-up
    5
    ·
    8 hours ago

    If not premium speed queen, then LG base models are best bang for buck I could find in terms of reliability.

  • 𝕸𝖔𝖘𝖘@infosec.pub
    link
    fedilink
    arrow-up
    6
    ·
    9 hours ago

    Not Samsung, they’re fancy, expensive trash. Not Whirlpool or Whirlpool brands, unless you want to replace 2 years 1 month (to the day) of purchase. I’m in a similar boat as you.

    Edit. 2 years 1 month, by the way, is 1 month past the manufacturer’s warranty, which is trash anyway.

  • Hi_ImAmber@piefed.ca
    link
    fedilink
    English
    arrow-up
    6
    ·
    10 hours ago

    My In-laws have speed queens and they are the loudest and jankiest washer and dryer I have ever seen. And they have had to have them serviced as much as my 10 year old Samsung set and they are only a couple of years old.

  • CompactFlax@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    7
    arrow-down
    2
    ·
    10 hours ago

    Speed queen is junk from the 1960s. Incredibly inefficient and fairly ineffective. Top loaders are a joke.

    Miele is modern top end. Bosch is also quite good. Cheaper too.

    I have an LG. It is positively violent.

  • yaroto98@lemmy.world
    link
    fedilink
    arrow-up
    13
    ·
    13 hours ago

    Fun story the motor in every dryer that turns the drum is made by the same company.

    Also, anything except for samsung.

    2nd fun fact. Microwaves are all made by the same company too.

    • proudblond@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      5 hours ago

      I actually don’t hate my Samsung washer/dryer all in one unit but at the same time I don’t blame anyone for avoiding that brand like their lives depended on it.

    • dual_sport_dork 🐧🗡️@lemmy.world
      link
      fedilink
      arrow-up
      9
      ·
      10 hours ago

      That’a not quite true. Microwave components are made by one of about three manufacturers, which is slightly better but not by much. Sharp, LG, and Panasonic to my knowledge.

    • CompactFlax@discuss.tchncs.de
      link
      fedilink
      English
      arrow-up
      4
      ·
      10 hours ago

      True. Panasonic “inverter” microwaves are still Panasonic though, I think.

      Also, Refrigeration is Midea, Daikin, and a handful of others in very limited applications; some American made AC, Mitsubishi heat pumps, Liebherr refrigerators.

      Tv and computer panels are similar - I think it’s LG, Samsung, and one or two Chinese companies in the market. That Dell display? The Apple display? Probably LG.

  • i_stole_ur_taco@lemmy.ca
    link
    fedilink
    arrow-up
    15
    ·
    13 hours ago

    I’ve had good luck with LG buying new.

    If I didn’t care about anything fancy, I’d probably talk to the local repair shop that refurbishes old units and sells them on the cheap with their own warranty.

    • FlashMobOfOne@lemmy.world
      link
      fedilink
      arrow-up
      4
      ·
      12 hours ago

      This. I’ve heard so many horror stories about new appliances not lasting more than a couple years, tops.

      When I have something I need to replace I’m going to go the second-hand route myself. Could not care less if it’s 10-20 years old.

  • rem26_art@fedia.io
    link
    fedilink
    arrow-up
    6
    ·
    11 hours ago

    My parents bought an LG washer about 6 years ago thats still working fine. (They’re still using their Maytag dryer from the mid 90’s) No issues with it. It has some IoT stuff, but you can just not connect it to any network and it still works. The advice they received when they were shopping around was “anything but Samsung”

  • SolacefromSilence@fedia.io
    link
    fedilink
    arrow-up
    4
    ·
    10 hours ago

    Honestly, I suggest to keep the settings/options basic and don’t buy the cheapest units.

    I have a Samsung pair in 2010 from before they shit the bed and have been happy.

    With that said, I have replaced a water pump (year 2) and water-inlet solenoid valve (year 15)… then a dryer belt (year 13) and gas-inlet solenoid valve (year 15). Fingers crossed and thanks to all the youtube videos for keeping them running.

  • Fondots@lemmy.world
    link
    fedilink
    arrow-up
    10
    ·
    13 hours ago

    My previous wash & dryer were LG, and lasted probably about 15 years. We replaced them with new LG ones, and they seem to be largely about the same build quality. We’ve only had them for about a year, so I can’t say for certain, but so far no issues.

    They do have IoT features, they’re optional though and would work fine without hooking them up to the internet. If you do have smart speakers and such, it is kind of nice to have them let you know when they’re done running because we can’t hear them go off in the basement from upstairs.

    We also sprung for the pedestal washer, which has been great. I was skeptical about it but I find myself using it a lot for when you have just a couple things that have special washing instructions or just a bit more than you can fit in the main washer. It’s also nice having the washer and dryer being a little higher to load/unload, and the pedestal drawer under the dryer is nice for storing detergent and such.

    • shartgargle@lemmy.zipOP
      link
      fedilink
      arrow-up
      4
      ·
      13 hours ago

      Well buying the same brand again says quite a bit. I swear I’ll never buy anything but Toyota ever again.

  • thesohoriots@lemmy.world
    link
    fedilink
    English
    arrow-up
    7
    ·
    13 hours ago

    I talked to an appliance repair guy recently about the longevity of washers and he said the front-load tended to last longer, for whatever that’s worth.

    • jubilationtcornpone@sh.itjust.works
      link
      fedilink
      arrow-up
      1
      ·
      7 minutes ago

      Used to be the opposite was the case. But I suspect residential front loads have been around long enough to work most of the kinks out. And, if the tub seal fails in a top load, theres a good chance you have to replace ths entire drive mechanism which is like 40% of the cost of a new washer.

    • shartgargle@lemmy.zipOP
      link
      fedilink
      arrow-up
      2
      ·
      13 hours ago

      Huh, that’s interesting. I was anticipating what you were going to say until the end. That’s kinda surprising, but I guess if I saw blue prints, or took one of each apart to see how the mechanisms work, it might make sense. I’ve just never really bothered or had a chance.