Nah, they usually don’t have that any more. From what I’m told it’s background noise for them to fall a sleep too. I’m also told they pay hundreds of dollars every month just to enjoy this.

I think we need to define TV.

Tv in the sense of broadcast stations and shows. Haven’t touched that since 2008, DVDs and Streaming has everything I want.

TV in the sense of a shared screen for everyone. Nah, still needed and can be better than ever thanks to streaming, both retail and… other sources (plex)

I am doing my part

Trying to avoid apps with subscriptions. The way I see it, it’s a question of when not if they change how the app works.

I 100% agree, and have Fusion360 in my VM. But there is a method to FreeCAD’s madness and once you get it, FreeCAD begins to make sense.

I found it hard to go back to fusion especially with the amount of control I had with my designs.

Also FreeCAD V1 is out, and it’s a marked improvement over their previous releases. Might be worth a try.

Being able to sync music or movies to my iPhone/iPad. More of an Apple issue than Linux, yet Mac/PC is compatible.

VLC does work, but since it’s not how Apple wants you to use your device it’s not as convincing nor flushed out.

Normally I’d upload these to thingiverse or printables, but these models are too specific to upload the STL’s. That said I did design them in FreeCAD and I’ve uploaded them to my GitHub Here; https://github.com/the16bitgamer/16BitVirtualStudiosDesigns/tree/main/Misc/TV Mounts

“Hahahaha”

Oh wait. You’re serious? Let me laugh even harder.

“HAHAHAHA”

Thank you so much for this, didn’t know where to get the unions side of things.

I was getting the impression management wanted to compete with the Amazon curriers but I didn’t expect this.

The union has every right to fight this, and I hope they win. At the same time I hope that they do find a middle ground with the 7-day delivery. While I don’t want/need it, the general population does expect 7 day/week delivery like everyone else does. Even if it’s only a limited service I feel it’s something they can negotiate with. (Not that it means much based on their article)

This is the way

2 prints, swapped after the last solid infill on the bottom, and before the first solid infill on the top.

It does but from my testing only on impossible shapes. Like two triangles mirrored at the tip with a width of 0.

It has other issues still, but the app is stable.

Is it decent ? Yes

Should I look elsewhere? Also yes.

CAD is difficult to understand on a good day, and FreeCAD is a beginner unfriendly implementation of it.

I personally love it and it’s an excellent tool if you already know what you are doing. If you don’t, it’s a mess of screens and spaces with no rhyme or reason.

My two cents. Learn CAD first, Google Sketchup or Fusion 360 are good and beginner friendly with lots of tutorials. Then move to FreeCAD to learn the differences.

That said if you want to just try FreeCAD, this release is the best I’ve used from them.

The commercial alternative to blender is software like Maya. But I too struggled with Blender, however I feel that’s because 3D modelling is different from CAD, since modelling is like molding clay into the shape you want it in, rather than accurately measuring it out like in CAD.

Yeah Fusion is the way to go, especially if you are learning. Lots of hate for it around here, due to Autodesk endlessly changing their policies. But there’s no point in learning the basics when you don’t know if it’s you… or the software.

But if your issue is just navigating the 3D space in FreeCAD, you can set it such that it’s the same in TinkerCAD/Fusion 360. FreeCAD calls it Revit, and you can set it in the lower right corner. Hold you mouse over it to show tool tips.

In my view CAD is always worth learning, especially if you understand what prints best on your printer.

FreeCAD is basically the worse possible beginners tools. Don’t get me wrong when you learn it, it’s good and comparable to professional CAD software. But the learning curve is dumb.

Learn the basics first. TinkerCAD is free (from Autodesk) and will get you started. But if you want something which would take you further Fusion360 is fantastic for beginners.

The workflow of CAD is as follows. Sketch -> Action -> Sketch -> Action. Lets say you want to make a box with a hole in it. Sketch the outer box -> Extrude it -> Sketch the inner box -> Extrude/Cut it.

BluRay is just a data format. PS3 games are just encrypted, which means with a modded PS3 you can back it up.

Same process in order to play it on RCPS3

PS2/PS1 throw it into a DVD player Ron a PC and rip it.

PS3 you’d need to homebrew it. Same process to get the files ready to play on RCPS3

lol, now that sounds fun.

This is a game from 2007, I doubt there are new/replacement discs. That said it appears to be functional so we’ll see.