TIL “ArguingOnline” is a hobby.
TIL “ArguingOnline” is a hobby.
How is this not a photo?!? The lighting and detail on the (silk?) fabric are absolutely incredible. You can almost see the threads at the edges where it goes from lighter to darker, what a stunning painting.
I actually tried this as my second step in trouble shooting, the first being using different ports.
In the non-omada management software, it defaults to 10G, and if the devices is on before the switch it negotiates 10G correctly and works at full speed (tested with iperf3). As soon as any of the 10G connected devices is rebooted, I’m back to 1G. To fix it, I then have to set the port to 1G with flow control on, apply changes, save config, refresh page, change to 10G with flow control off, apply, save config and it goes back to 10G again. Alternatively I can reboot their switch and it’s fine again.
In Omada its the same, fewer steps to get there but I have to sometimes do it 2-3 times before it works.
Same issue with both 10G TP-Link switches, so I’m thinking it might be the SFP. Using Intel SFP+ with FS optical cables. I’m using a DAC for the uplink from the 10G switch to my unmanaged 2.5G switch, and that doesn’t have the problem of dropping, always works max speed.
Fair enough. Is there anything one can do to mitigate? Like I know for the recent issue in the news, a mitigation strategy for consumers is to basically reboot their router often. I keep my router and all hardware up to date, and try to follow news here. Not sure if there is really anything else I could do.
Oh wow, hard to believe a huge bug like that would make it to production. What do you recommend instead? Stick with TP-Link?
From what I’ve seen it seems consumer routers, but it raises flags is all, and makes me reconsider options.
So I just added a TP-Link switch (TL-SG3428X) and access point (EAP670) to my network, using OPNSense for routing. I’m still within the return window for both items. I understand the article mentions routers, but should I consider returning these, and upping my budget to go for ubiquity? The AP would only be like $30 more for an equivalent, so that’s negligible, but a switch that meets my needs is about 1.6x more. And still only has 2 SFP+ ports, while I need 3 at minimum.
I’ll give that a shot, thanks!
Thanks for the detailed reply.
So the command gives me an error that nfs-client cannot be found.
The fstab just has basic default config. No timeout set.
I considered network issues, though it seems to be quite stable for other services. Not ruling it out just yet. I have a new switch coming in the next week, so will test if the issue persists when I put that in.
I will also give autofs a shot.
Thanks!
Haha don’t cut it up just yet! I’ll try some of the other options suggested here, as I’d like to learn what the issue is. The worst case I’ll try smb.
Thank you, will try this when I have time later this week.
They are mounted via the gui, but it just puts the mount into fstab. I checked the config there and it is just the standard default options for an nfs mount.
Edit: and no, I don’t lose it on reboot. Reboot re-mounts the share correctly.
Through the Cockpit gui, which just puts it into fstab. I checked the fstab config and it just has the basic default settings.
Doesn’t seem like it as far as I can tell.
Ya you’re right some of their views are 👎. I actually stopped listening to the podcast sometime over the pandemic when they had a super right wing guest on and they let loose and agreed with his views which was uncommon. Didn’t finish the episode, but came back to it a few years later and I recall hearing Aaron back track. Some of their newer episodes are still interesting and they seem to be more balanced, though I’ve been listening to the pre pandemic episodes.
For me Mysterious Universe takes the cake. A couple of Aussie guys talking about anything and everything paranormal, big foot, lucid dreaming, missing 411, stone tape theory, mediums, hauntings, abductions, time travel, ufos, men in black, remote viewing, alternative history theories, etc. They don’t really delve into conspiracy theories which I appreciate.
They’ve been at it for ages, and they are on season 32 of the regular show and 30 of the plus show (2 seasons per year). Most shows they discover a book or essay and do a deep dive into it, explaining and linking it to other research.
My main draw is how they don’t take anything too seriously, and are able to objectively present a theory about “black ops stealth [person of short stature]”, mixed with “the meaning behind your Thai diving instructor’s tramp stamp”, and follow it by well researched interviews with authors and researchers. Giving facts and letting listeners draw their own conclusions.
All that to say, I’ve listened back to season 11 so far, and have thousands of hours of content. Highly recommend.
Or just order water? It’s free for you, but costs the company money, while not making it difficult for the employees. Doing what you suggested is all around shitty for the workers who are just trying to get through their day and earn a wage, as well as the people in line wanting a drink. The company will not be affected in any way with your suggestion.
I’ve been boycotting the company for years now, even the items you can get in grocery stores (since at least some of them are made by Nestle, so double boycott points). Anytime anyone suggests we grab starbucks, I offer an alternative and we end up trying a local coffee shop or other non-terrible franchise.
Similar situation here. Lots of ghosting, or unmatching the day of a scheduled date. Had two dates in the last few months of using the apps. First woman was about 15 years older than her pics. Not unattractive by any means, but felt lied to from the get go. The other, let’s just say she had some work done after most recent pics, and the surgeon shouldn’t be practicing.
I feel like it should be “Jean”, non? If it was a Fiat or an Alfa Romeo, Giovanni would be a great fit. Maybe you have your own context or reasoning though ☺️.
Have you tried non official jellyfin clients? I had issues with the official app on AppleTV as well, so I switched to Infuse. The free app supports most things and I think the paid gives access to additional codecs if I recall correctly. The pro upgrade isn’t too expensive and the app is sleek across Apple devices. Only issue I’ve really had is sometimes if a video is not played to the end (as in, stopped during credits) it still shows up in the continue watching, but that might be a problem on my end.
I think MXPlayer is similar on Android which might be worth checking out.