I’m planning on building a PC soon and, while I have done plenty of research, I’d like to hear advice from people who have experience in the area personally. It’s also just nice talking to other people in general, lol

  • ramius345@beehaw.org
    link
    fedilink
    English
    arrow-up
    10
    ·
    edit-2
    2 years ago

    Don’t skimp on the power supply brand. Buy a reputable one. Buy one with headroom if you plan on upgrading your GPU at a later time.

    Watch some build videos from tech YouTubers and watch the steps they go through.

    For gaming start with the GPU and build around it. Pick a CPU with a reasonable price that will not bottleneck it. YouTube reviews are your friend here. Watch a few with your CPU and GPU pairing and get an idea of the average and one percent low marks.

    For your first PC, stick to air cooling. Pick a reputable brand.

    I personally like gamersnexus reviews for all the parts you can. They are very methodical with benchmarks. Ask questions here as you will have many.

    You may be building a PC for a use case other than gaming. If that’s the case you may want to pick another part to start your build around. For instance, developers have a different workload compiling code and would focus more on CPU and threaded workloads.

    Basically know your use case, budget, and ask specific questions as you learn from videos and the community will help you produce a great result.

  • araquen@beehaw.org
    link
    fedilink
    English
    arrow-up
    10
    ·
    2 years ago

    I would absolutely use “PC Part Picker” because as you assemble the various components, that site will tell you if there are incompatibilities. For instance whether a power supply will fit in the case.

    https://pcpartpicker.com

    And if you don’t have someone to bounce ideas off of, this is a pretty good site that was recommended to me to help narrow your choices.

    https://www.logicalincrements.com

    • aedyr@beehaw.org
      link
      fedilink
      English
      arrow-up
      1
      ·
      2 years ago

      I’ve used Logical Increments for a couple builds and liked it a lot. I didn’t copy their recipe verbatim, but you get some good starting points both on compatibility and cost.

  • starship_lizard@lemmy.world
    link
    fedilink
    English
    arrow-up
    7
    ·
    2 years ago

    Save everything that comes in your motherboard box. Don’t be the fool (me) who needs to buy m.2 screws on Amazon.

    • The_Hunted_One@beehaw.org
      link
      fedilink
      English
      arrow-up
      2
      ·
      2 years ago

      I end up saving everything from every box, haha. I still have all the cords from my modular PSUs sitting in my basement, still in their little bags

    • Swintoodles@beehaw.org
      link
      fedilink
      English
      arrow-up
      4
      ·
      2 years ago

      Also don’t forget to remove the plastic film(s) they put on the CPU/Cooler and everywhere else!

    • smackjack@midwest.social
      link
      fedilink
      English
      arrow-up
      1
      ·
      2 years ago

      Most coolers come with it preapplied these days, but it’s still good to have in case you need to reseat your cooler.

  • The_Hunted_One@beehaw.org
    link
    fedilink
    English
    arrow-up
    7
    ·
    2 years ago

    Slightly different advice from what others have said, but while building it, I’ve always used an anti static wristband, grounded to either ground or the pc case. Maybe I’m overly paranoid, but that’s what I was taught, and haven’t had any issues with ESD so far

  • felicity@feddit.de
    link
    fedilink
    English
    arrow-up
    3
    ·
    2 years ago

    There’s usually no need to buy the top end motherboards, they have a whole lot of bells and whistles you won’t ever miss.

  • Owl@mander.xyz
    link
    fedilink
    English
    arrow-up
    3
    ·
    2 years ago

    If you can, just pick the parts but don’t build it yourself, ask a friend who knows what he’s doing and watch or pay for it. You really really don’t want to screw it up with these GPU and CPU prices.

    • FairlyTall@lemmy.ca
      link
      fedilink
      English
      arrow-up
      1
      ·
      2 years ago

      It’s fairly safe to just do it yourself. Simply be aware you don’t have to force anything too much. Pushing the ram into the slots is likely the most force you need. Even if you get something wrong as long as you didn’t apply to much force and break some pins you can just reseat it and try again.

      CPU is the one you’re most likely to mess up but that takes virtually no force at all. If you’re using basically any force, stop and turn it because you clearly don’t have it lined up correctly. They should drop in and then lock into place.

      If building it is of interest to someone I think anyone can do it. If you don’t know, just stop a check a youtube video but these days it’s fairly easy to do and virtually impossible to plug anything into the wrong spot.

    • PurrJPro@beehaw.orgOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      2 years ago

      I would, but unfortunately I don’t know anyone with experience in this area. But I won’t be doing it by myself, and I’ve done quite a bit of research, so I at least think I won’t mess up to the point of breaking anything

      • Owl@mander.xyz
        link
        fedilink
        English
        arrow-up
        0
        ·
        edit-2
        2 years ago

        The site from which you buy your components doesn’t offer you to pay for assembly ?

        • PurrJPro@beehaw.orgOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          2 years ago

          No, sadly. Besides, I don’t know if I would go with that option even if it was. I’ve been wanting to build my own PC for a while and I am willing to run the risk, although it would be nice to have somebody with experience help

  • branchial@feddit.de
    link
    fedilink
    English
    arrow-up
    3
    ·
    2 years ago

    If you plan on doing anything with linux fuck nvidia. It’s such a PITA. Biggest regret of my build.

    • PurrJPro@beehaw.orgOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      2 years ago

      Trust me, I know (I tried running Linux on my current NVDIA PC… Never again). While I plan on running Windows (mainly due to how much support it has for like. Everything) I do plan on running Linux on a laptop in the future and possibly dual booting

      • branchial@feddit.de
        link
        fedilink
        English
        arrow-up
        2
        ·
        2 years ago

        I love dual booting. If I need to quickly check mails or search the web linux launches in an instant. If I need to game I dont care about longer boot time anyhow.

        • PurrJPro@beehaw.orgOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          2 years ago

          Yeah, that’s why I wanna dual boot myself, except there’s some software I need on Windows that isn’t available on Linux along with games. Also, what distro(s) do you use? I’ve already picked out a few candidates for what I’ll use, but it’s nice hearing firsthand experiences

          • branchial@feddit.de
            link
            fedilink
            English
            arrow-up
            0
            ·
            2 years ago

            I’ve been using Debian because it’s easy to use basically. But it’s no good for tinkering. It takes ages for packages to get moved into the stable channel and testing is exactly that and causes headaches. But if you want a stable and easy to use OS Debian is great. Set it up once and you’re set for a long time.

            But I like to tinker so there is a clutter of packages I’ve installed but don’t use and I’ve lost track of them and the configs. It runs but needs cleaning up (again).

            Which is why I’m going to switch to Guix. I’m hoping to replicate the same basic set up on my laptop and desktop with only minor differences. Guix allows the declaration of the entire system and if you use the same file it will always be set up exactly the same way. Plus the fact that I can roll back the entire system to a previous state sounds really appealing for someone who likes to break stuff. That said the declaration files and anything to do with Guix itself uses Lisp and as a lisp noob I’m expecting a lot of headaches and tabbing to the manual. Also package installation and so on seems rather unintuitive but the manual is well written and exhaustive. It’s more of an adventure for sure but the OS is stable and ready to use out of the box.

            • PurrJPro@beehaw.orgOP
              link
              fedilink
              English
              arrow-up
              2
              ·
              2 years ago

              I’ve never heard of Guix before! From what the official page tells me it seems like a pretty in-depth os, and I wish u luck with it!

            • s900mhz@beehaw.org
              link
              fedilink
              English
              arrow-up
              1
              ·
              2 years ago

              Ooo never heard of Guix, just did a little research on it. I am looking to switch to a declarative distro as well. I seem to have the same tendency of breaking shit when playing around with different packages and running different projects locally. I have been looking at NixOS, have you heard of it and if so, why did you choose GUIX over it?

              https://nixos.org/

  • daddy_hacker@beehaw.org
    link
    fedilink
    English
    arrow-up
    3
    ·
    2 years ago

    Lota of great advice here but my must have is a tray to put all the screws and other small bits. Far too easy to lose stuff. iFixit do a good one but you can find an equivalent lying around im sure.

  • nadiaraven@beehaw.org
    link
    fedilink
    English
    arrow-up
    2
    ·
    2 years ago

    I’ve found that the motherboard is often the make or break item with PC builds. Pay attention to how many 1 star reviews there are on Amazon or wherever, I think they tend to suffer from poor quality control.

  • WallaWallaWa@beehaw.org
    link
    fedilink
    English
    arrow-up
    2
    ·
    2 years ago

    Start the build outside of the case, use the box the motherboard came in as a table. Install the cpu, ram, hook up the psu (fully modular if your budget allows), power on and make sure all works. Easier to troubleshoot this way.

  • mauns@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    2 years ago

    Also in this day in age, triple check that your GPU will fit in your case!

  • l4sgc@beehaw.org
    link
    fedilink
    English
    arrow-up
    1
    ·
    2 years ago

    It’s difficult to know what advice might be helpful for you without more context, but the one mistake I made with my last PC build was choosing a small form factor case. I thought it looked really clean not to have all that wasted space inside the case, but it makes any system changes much more arduous trying to squeeze my hands into tight spots.

    Also when I needed to upgrade my gpu a few months ago and filtered to ones that would fit in the case there was literally only 1 option, it wasn’t my first choice but it was close enough I went with it instead of dealing with the hassle of buying a new case and rebuilding everything. I know for sure I will need a new case the next time I need a new gpu though.

    The other thing I’ll mention is to make sure all your bios settings are configured correctly: resizable bar, XMP, etc.

    • PurrJPro@beehaw.orgOP
      link
      fedilink
      English
      arrow-up
      0
      ·
      2 years ago

      Thanks! Choosing a case that’s small enough to be easy to transport but not hard to build in is a concern, but I believe my current case will do well! Setting up the bios is what I’m more concerned with, but I’m sure I’ll manage. And sorry but the vagueness of the post, I’m generally looking for any advice instead of specific advice

      • l4sgc@beehaw.org
        link
        fedilink
        English
        arrow-up
        1
        ·
        2 years ago

        Bios can be difficult because some of the settings are named differently if you have an amd or intel cpu. Additionally the interface and where the settings are located seems to be dependent on the motherboard manufacturer.

        But in general the important things that are required to install windows 11 are uefi boot and the tpm being enabled, and these will almost certainly be set to the correct values by default.

        For gaming performance resizable bar/smart access memory improves gpu performance, and xmp/expo improves ram performance, these is a decent chance these will not be enable in the bios by default.

        For programming, I also wanted to use the windows subsystem for linux, and I had to go to my bios and enable cpu virtualization for that. Not sure what other workflows might rely on virtualization.

        I’ll also just mention that at one point I had some instability related to restarting. If I tried to restart it would post but fail to boot into windows, but doing shut-down and then turning the computer on again worked fine. And I think I resolved that by disabling fast-boot in the bios. Note that I wouldn’t expect you to get that restart issue, I think it was related to me being on the insider-preview build of windows at the time. But fast-boot-off is something I made a note of as a good troubleshooting step.