I’m wondering, what resources does Lemmy need? For a small instance (let’s say, me and some friends) or a large instance (think Lemmy.ml or Lemmy.world or the like…).

Also, where do y’all host your instances?

  • ShittyKopper [old]@lemmy.w.on-t.workEnglish
    2·
    2 years ago

    I’m running this instance I’m posting this from (single user) on a Hetzner CX21 (2 core / 4 GB ram / 40 GB storage)

    The current stats (according to podman) are as follows

    NAME        CPU %       MEM USAGE / LIMIT  MEM %       NET IO             BLOCK IO           PIDS        CPU TIME       AVG CPU %
postgres    0.41%       95.12MB / 4.005GB  2.38%       1.863GB / 346.5MB  240.6MB / 10.28GB  11          16m26.041917s  0.55%
caddy       0.03%       54.47MB / 4.005GB  1.36%       244.9MB / 239.3MB  138.7MB / 20MB     9           2m41.545823s   0.40%
lemmy-be    0.10%       22.95MB / 4.005GB  0.57%       627.4MB / 2.831GB  169.4MB / 13.71MB  5           10m25.284369s  1.30%
pict-rs     0.15%       32.23MB / 4.005GB  0.80%       207.1MB / 264.7MB  584.5MB / 460.3MB  13          14m32.532772s  1.82%
lemmy-ui    0.02%       37MB / 4.005GB     0.92%       53.42MB / 10.18MB  231.1MB / 34.19MB  12          26.062038s     0.05%

    Net IO is inaccurate as that also includes networking between the individual containers (I’m definitely not exposing postgres to the wider world, at least not intentionally)

    Oh, and images are using about 200MB disk space so far, although this server hasn’t been up for more than 24 hours even, so we’ll see how that goes.

      • ShittyKopper [old]@lemmy.w.on-t.workEnglish
        2·
        2 years ago

        Is it shitty setting an instance up or is it doable?

        Definitely needs some work. The instructions are all over the place, the Ansible roles expect to be the only thing in your system (unfortunately common), both the manual and Docker installation guides are meh and partially unsupported. Caddy is a config snippet and “good luck” (implied, they don’t put it that bluntly). I’m sure there are a fair few people who are accidentally running a dev-focused setup on prod.

        TLDR: It’s definitely not for the newcomer. I may throw my own configs up somewhere for future reference.

        Are u running on perm or via a provider?

        Not sure what you mean by that.