I have a Raspberry Pi 4 Model B with 8GB of RAM, and I’m looking for a bit more powerful solution that would have similar power consumption. I would like to host a Minecraft server, but chunks take too long to generate. Do you have any recommendations?

  • ripe_banana@lemmy.world
    link
    fedilink
    English
    arrow-up
    16
    ·
    1 year ago

    To give a different opinion than all the thin-clients, old laptops can be a good choice too. I am a bit preferrential to really nice old thinkpads.

    If you buy them used you can get insane prices (~$40) and also you get all the laptop conveniences of a keyboard, screen, battery (for power failure). Also I think the power/performance ratio is pretty much the same to the thin clients.

    • Krtek@feddit.de
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Using the laptops battery isn’t a good long term solution though as having it plugged in all the time will wear it down fast, not to mention that the battery is build for maximum energy density and not durability/safety. It just simply not working when it is finally needed is almost a pretty light issue when it can just also inflate and pose a huge fire risk next to all of your data. Laptops are great power efficient platforms though for servers

      • ripe_banana@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        First off, I think you’re completely right in that laptop batteries are definitely a non-ideal solution. And, I’m really not an expert in this, so take my words with a grain of salt.

        You could mitigate a bit of the dangers by doing some of the following (I only did the first):

        • Reducing the max charge level to 50% of the capacity.
        • Monitor your batteries health to alert for any discrepancies.
        • Switch out your batteries every couple of years (which is super easy without downtime on the aformentioned old thinkpads).

        If you are an under $100 budget, there seems to be an argument that maybe you are willing to risk a little bit for that extra power reliability.

        • Krtek@feddit.de
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          For that the laptop has to support a charge level on a hardware level though, just setting a limit will cause it to constantly switch between using the battery and charging the battery which would be much worse than keeping it at 100%. Most older and budget systems don’t support that

          • ripe_banana@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            1 year ago

            I see. On the surface, that seems to make sense. I might need to rethink how I configure my batteries.

  • AggressivelyPassive@feddit.de
    link
    fedilink
    English
    arrow-up
    10
    ·
    1 year ago

    Look for second hand business PCs. They can be had extremely cheap and draw almost no power.

    I have a Futro S920 and an HP ProDesk mini G300 (or something like that, never understood the naming). Both draw about 5-7W from the wall, which is roughly the same as my RPi3b.

    The HP one has an i5 6500T and 16GB RAM, both upgradeable. There’s also a real 2.5" slot including SATA connector on the board, an M.2 slot and an NGFF slot. Really cool device. The only slightly annoying thing is, that the fan can’t be controlled (or at least Debian can’t detect any PWM devices), and it’s always slightly-on, which can be annoying. But for 100€? I think that’s a good deal.

    • CAPSLOCKFTW@lemmy.ml
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Yeah, thin clients are the way to go, but tgey will draw more than 5-7 Watt under load.

        • CAPSLOCKFTW@lemmy.ml
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          My Futro S740 with an J4105 CPU consumes up to 14 Watts according to this article. It is faster than a rpi 4b plus i bought it refurbished for 40€. I think a system with an I5 6500t will need even more power under load.

          • AggressivelyPassive@feddit.de
            link
            fedilink
            English
            arrow-up
            3
            ·
            1 year ago

            Well, yes, but it’s also more powerful. If it’s twice as powerful as a pi, it will only be half as long under load for a given amount of computation and thus require less power overall.

    • drudoo@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      How would an i5 6500T compare to a mini pc with an N100 or N305 like the beelink?

      I’m serious debating if I should get a beelink (or equivalent) with an N100 and 16GB ram or go for an Optiplex with an i5 6500T and 8GB ram. Both are about the same price where I am located.

      Im mainly interested in power usage and performance and not so much in upgradability.

      • dartanjinn@lemm.ee
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        I have a zx01 or something like that from AliExpress with an N100 and 16GB. Those little machines are seriously impressive. It’s running Garuda and my son has not complained once about any game he’s tried to play. I don’t play games, I just bought it on a whim cause it’s tiny and $150 or so. I’ve run several systems on it without a hitch. I’m pretty certain it’ll hose a Minecraft server without an issue.

        • drudoo@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          Thanks. I’ll check them out, with taxes they are unfortunately hard to get at $150, more like $225-250. Really want something more powerful than a Pi4

  • Decronym@lemmy.decronym.xyzB
    link
    fedilink
    English
    arrow-up
    7
    ·
    edit-2
    1 year ago

    Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

    Fewer Letters More Letters
    RPi Raspberry Pi brand of SBC
    SATA Serial AT Attachment interface for mass storage
    SBC Single-Board Computer
    SSD Solid State Drive mass storage

    4 acronyms in this thread; the most compressed thread commented on today has 4 acronyms.

    [Thread #48 for this sub, first seen 15th Aug 2023, 19:25] [FAQ] [Full list] [Contact] [Source code]

  • Briongloid@aussie.zone
    link
    fedilink
    English
    arrow-up
    7
    ·
    1 year ago

    Lenovo ThinkCentre Tiny, or another brand similar.

    The pricing since the pandemic has been cheaper than Raspberry Pi4’s in my region.

  • ByteWizard@lemm.ee
    link
    fedilink
    English
    arrow-up
    4
    ·
    1 year ago

    OrangePi makes a decent solution with a built-in 8GB eMMC module. Makes it much faster. Dunno if you are CPU or IO bound on the RPi4.

  • galick@feddit.uk
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    check out the orange pi 5 and 5 plus. you’ll most likely have to purchase from aliexpress but could be what you’re after.

  • Corroded@leminal.space
    link
    fedilink
    English
    arrow-up
    3
    ·
    1 year ago

    I’m not sure if they are much more powerful but Pine64 might have some products you may want to check out.

    I use the RockPro64 pretty regularly.

    • HeyJoe@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Wow that’s still active? I remember getting one when they had a kickstarter way back and realizing quick that it doesn’t matter how nice the hardware is if support is non existent. Glad to hear they are still around and I am guessing the community is much larger these days. I’ll have to see if I can dig my original model up from somewhere and see what I can use it for these days.

      • Corroded@leminal.space
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        It’s definitely gotten larger since the introduction of the Pinephone and Pencil (soldering iron). The PineNote (eink tablet) and LoRa add on for the PinePhone are some things I’m excited to see more support for.

        Here’s some Lemmy communities if you want to check them out.

        !pine64@lemmy.ml

        !pinephone@lemmy.ml

        !pinetime@lemmy.ml

        I’d also recommend checking out their Wiki. Specifically the software sections.

  • flathead@quex.cc
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    recently bought 2 of the beelink mini PCs - they seem pretty solid so far - they are quite a bit more expensive than the pi but I think they offer pretty good bang for the buck for a small form factor server.

  • Faceman🇦🇺@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    I recently got a beelink mini with an N95 and 8gb of ram and the thing rips, running Proxmox with a few linux and windows VMS all sharing resources, replaced 2 pi3s and a pi4 with it for my home automation services.

    Only trouble I’m having is hardware iGPU passthrough is iffy, but that might just be me not having the linux-fu to get it working stably.

  • urshanabi [he/they]@lemmygrad.ml
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Question for the folks in here, are there any inexpensive SBCs with USB-C that can do data and power under ~80 USD? I’ve seen I think the Orange Pi 5 and a few others but I’m not sure what the track record on support is.

  • CAPSLOCKFTW@lemmy.ml
    link
    fedilink
    English
    arrow-up
    3
    arrow-down
    3
    ·
    1 year ago

    You can’t have more calculation power for the same electrical power consumption. A thin clirnt with an i3 or i5 maybe.